Kies uw leveringslocatie

De keuze van de land/regio-pagina kan invloed hebben op verschillende factoren zoals prijs, verzendopties en beschikbaarheid van producten.
Bekijk alle locaties
Ga naar www.igus.com
Nieuws - Ontdek hier alle nieuwe producten
Nieuwsbrief schrijf u hier in!
Nieuwe job? Bekijk onze vacatures
Wordt binnen 24 uur verzonden Levensduurberekening CAD Direct downloaden
mijnigus
Winkelwagen
(0)
Mijn contactpersoon
Selecteer locatie

Na selectie van uw postcode, wijzen wij u het relevante personeel toe dat u meteen van dienst is.
Bekijk alle contacten
BE(NL)
Menu
  1. Start
  2. Kabelrups-systemen
  3. Kabelrupsen-wiki
  4. Assembly Overview
  5. Micro flizz® installation instructions

Assembling single rail with a carriage

Parts list - Microflizz® & required tools

Parts list (with one channel element)
  • Aluminum profile
  • 2 Cover plates
  • 8 Torx screws
  • 4 Cross-head screws
  • 2 Metal pins
  • Preassembled chain with carriage
Tools required for assembly
  • Cross-head screwdriver
  • Torx screwdriver, size 20
  • Plastic and metal hammers
  • Allen key, size 4
1) Fasten "closed" cover plate (A) on outer end of the guide channel (B) with four Torx screws (C)
2) Insert e-chain® with carriage (D) in channel so that the "wings" of the energy chain are guided in the channel
3) Fasten connecting element (E) from above with two cross-head screws
4) Fit "open" cover panel (F) to the other end of the guide channel and fasten with four Torx screws (C)
1) Hammer metal pin (G) into required side of channel with metal hammer
2) Attach connection plate (H) on the same side, push it as far as the middle and fasten with M6 set screw
3) Put feed module (J) in place and fit together with plastic hammer
5) Fit together other channel element(s) (see steps II,1 and II,2) and tighten 2nd screw on connection plate (H)
6) Insert first e-chain® with carriage (D) with the connection element (E) forwards into channel. Please note correct installation direction of the carriage!
7) Insert second energy chain into channel (like II,6)
8) Connect e-chains® with channel element. Align so that the teeth on the strain relief (L) are flush with the inside edge of the channel
9) Connect e-chain® at sides through the channel with four cross-head screws (two each side)
10) Assemble cover plates on both sides ("closed" version)
10) Completely assembled Micro flizz® with several channels and two carriage
Simple assembly of Micro flizz®
Assembly of 2 micro flizz® systems

Advies

Ik beantwoord graag uw vragen persoonlijk

Photo
Mitch Joensson

Technische Binnendienst e-chains® en chainflex®

+32 3 330 13 66
Schrijf e-mail

Shipping and consultation

Persoonlijk:

Maandag t/m vrijdag van 8.00 uur - 20.00 uur.
Op zaterdagen 8.00 uur tot - 12.00 uur.

Online:

24h

The termen "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "chains for cranes", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus improves what moves", "igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "readycable", "readychain", "ReBeL", "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "triflex", "twisterchain", "when it moves, igus improves", "xirodur", "xiros" en "yes" zijn wettelijk beschermde handelsmerken van igus® GmbH/Keulen in de Bondsrepubliek Duitsland en, indien van toepassing, in sommige andere landen. Dit is een niet-uitputtende lijst van handelsmerken (bijv. lopende handelsmerkaanvragen of geregistreerde handelsmerken) van igus GmbH of gelieerde ondernemingen van igus in Duitsland, de Europese Unie, de VS en/of andere landen of rechtsgebieden.

igus® GmbH benadrukt dat het geen producten verkoopt van de bedrijven Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosch Rexroth, SEW, Siemens, Stöber en alle andere drive-fabrikanten die worden genoemd op deze website. De producten die worden aangeboden door igus® zijn die van igus® B.V.