There is a big difference between cables made specifically for continuous-flexing applications and regular flexible cables.
Understanding the distinction is extremely important when you're choosing cables for use inside a cable carrier - or for any automated environment.
 |
|
3 Ways to Avoid Corkscrewed Cables
A competitor's corkscrewed cable in comparison with a Chainflex® continuous flex cable
If you've ever seen corkscrew damage on a cable, you've probably also asked yourself, “How the heck did that happen?”
It's important to understand the factors behind these kinds of failures and what characteristics a cable should have to prevent this corkscrew effect in the first place.
Check out these three design attributes which will ensure you avoid cables corkscrewing in your continuously flexing application:
The majority of flexible cables are constructed in layers, but these can corkscrew in demanding applications.
1. Bundle Design
The majority of flexible cables are constructed in layers. While this type of cable is inexpensive to produce, tensile forces pulling the conductors in the outer radius and compressing conductors within the inner radius cause the cable to begin to corkscrew.
Chainflex® continuous flex cables have a bundled design, which prevents corkscrewing.
-
Chainflex® continuous flex cables are constructed in bundles with short pitch lengths. This design provides inner stability because the tensile forces operating inside balance one another out. The cable will not corkscrew even under maximum bending stress.
The core of the flexible cable is comprised of inexpensive filler.
2. Cable Core
The cable core of a regular flexible cable is comprised of inexpensive filler, which does not protect the stranded structure or prevent the conductors from falling into the center.
Chainflex® continuous-flex cables have a tough, rope-like core.
In comparison, properly designed continuous-flex cables have a tension-proof, rope-like center element. This is extremely strong and prevents the type of damage that can lead to corkscrewing.
The jacket of this flexible cable can be pulled off using your bare hands.
3. Cable Jacket
To the naked eye, the jacket of a flexing cable may look the same as that of a cable designed for continuous flexing. However, this cable will not last because its conductors are twisted in layers. As seen in the photograph, the jacket can be pulled off the cable's conductors using your bare hands.
The jacket of the Chainflex® continuous-flex cable has a high-pressure extruded, gusset-filled outer jacket that cannot be pulled off.
The Chainflex® continuous-flex cables on the other hand have a high-pressure extruded, gusset-filled outer jacket, which is resistant to abrasion, oils and chemicals. While the jacket construction allows it to be flexible, you can see from the photo that it is virtually impossible to remove the jacket from the body of the cable.
Useful links
Your contact
Don Nester +1 401 438 2200 Your requirements?
Subscribe to
e-newsletter
Contacts in your location (can be on-site within 24-48 hours)
No minimum order
On-site and telephone support
Delivery from 24h*
Free samples
More than 100,000 products available! Open Mon-Fri 8:00 am - 8:00 pm EST.
No minimum order
